Add opt-in multi-GPU sweep parallelism; fix GPU pinning and run dir races
For shape-heavy ops the autotune sweep dominates wall time, not the measurement. _parallel_warmup_plugin shards the sweep across N GPUs and hands the merged configs to the normal single-GPU serial measurement, so timing stays comparable. Activated by PARALLEL_WARMUP_GPUS=N (silent no-op when unset, so it can stay in the plugin list); output layout, REPLAY_FROM usage and the latency table are unchanged. Measurement is deliberately not parallelized: N processes saturating one box couple through the power/thermal budget, so per-card latency gets dragged by its neighbours by an amount that does not reproduce. Config keys whose winner differs across shards are counted and reported as a WARNING -- that count is how much to trust the run. Fixes found while auditing: - Shards no longer overwrite CUDA_VISIBLE_DEVICES with a bare shard index, which a caller who had selected idle cards (e.g. 6,7) would see re-interpreted as absolute ids 0,1 -- silently benchmarking on the busy cards they were avoiding. - Interrupting the sweep no longer leaves N subprocesses holding GPUs; children are terminated and reaped before the exception propagates (BaseException, since KeyboardInterrupt is not an Exception). - run_pytest.sh claims its output dir with a bare mkdir and retreats to a -2/-3 suffix on collision. The second-resolution timestamp meant two concurrent runs shared one directory and overwrote each other. - Replay eviction failures now emit a distinct compile_*_no_evict marker. LibTuner.cache is a sqlite-backed ConfigCache with no __delitem__, so the bad config could not be dropped and the retry re-read it, while the log still claimed a clean fallback to live autotune. Also trims comment density in both shell scripts and reworks the README: promotes the parallel and cudagraph sections out from under the A/B flow, groups the env table by purpose, documents that two record-mode runs are not comparable, and marks ab_fold_test.sh as a caliber example whose switch upstream has already removed.
This commit is contained in:
@@ -2,7 +2,7 @@
|
||||
|
||||
针对编译器（FlagTree）改动做算子级 A/B 性能对比的 pytest 插件集 + 驱动脚本。在 FlagGems benchmark 体系之上解决三个问题：
|
||||
|
||||
1. **可复现**：固定随机种子、指定 shape、固定 autotune config，把 A/B 两次运行之间的差异收敛到"编译器改动"这一个变量；
|
||||
1. **可复现**：固定随机种子、指定 shape，并通过 record/replay 让 A/B 两侧锁定同一套 autotune config，把两次运行之间的差异收敛到"编译器改动"这一个变量（**config 必须靠 replay 锁定，不会自己稳定**，见「为什么需要 replay」）；
|
||||
2. **可解释**：自动按 shape 收集每次运行实际使用的 ttgir（带可读的变体命名），供 IR 级 diff；
|
||||
3. **口径统一**：cudagraph 计时消除 launch 开销，小 kernel 的对比不被 CPU 侧噪声淹没；capture 前按 warmup 预算显式预热吸收 autotune/JIT，首轮即稳态、多轮一致。
|
||||
|
||||
@@ -26,20 +26,35 @@ softmax:
|
||||
- [64, 512, 512]
|
||||
```
|
||||
|
||||
跑之前先 `nvidia-smi` 确认目标卡空闲——共享机器上别的任务会把 baseline 和被测两边一起等比拖慢，出一份看似自洽实则作废的数据。多卡机器上用 `CUDA_VISIBLE_DEVICES=<空闲卡号>` 明确选卡。
|
||||
上面这条命令是 **record 模式**：现场 autotune、把选中的 config 存档。它用于单次摸底或给 replay 提供基准，**两次 record 的数字不能互相比**——做对比走下面的「A/B 对比测试标准流程」。
|
||||
|
||||
脚本内固定了 `--level core --mode kernel`；`USE_FLAGTUNE` 默认 `0`（普通 autotune，快速出结果），需要 FlagTune 扩展调优空间时用 `USE_FLAGTUNE=1 bash run_pytest.sh`（首跑全量搜索、慢，见"为什么需要 replay"一节）；需要改动其它口径时直接编辑 `run_pytest.sh` 中的 pytest 命令行。
|
||||
跑之前先 `nvidia-smi` 确认目标卡空闲：共享机器上别的任务会把两侧一起等比拖慢，出一份看似自洽实则作废的数据。多卡机器用 `CUDA_VISIBLE_DEVICES=<空闲卡号>` 选卡。**测量始终单进程单卡串行**，这是计时可比的前提；多卡仅用于可选的 sweep 加速（见「加速：多卡并行 sweep」）。
|
||||
|
||||
脚本内固定了 `--level core --mode kernel`，其余可调项都走环境变量（见下）；需要改动这两个口径本身时直接编辑 `run_pytest.sh` 中的 pytest 命令行。
|
||||
|
||||
### 环境变量一览
|
||||
|
||||
| 变量 | 默认 | 说明 |
|
||||
|----------------|---------------------------|--------------------------------------------------|
|
||||
| `OP` | `fused_marlin_moe_mxfp4` | 测试函数名（`test_` 之后的部分） |
|
||||
| `OP_FILE` | `fused_marlin_moe` | benchmark 文件名（`test_` 与 `.py` 之间的部分） |
|
||||
| `SHAPE_FILE` | 空（用脚本内置 yaml） | shape yaml 路径 |
|
||||
| `FLAGGEMS_DIR` | `/workspace/FlagGems-dev` | FlagGems 仓库路径 |
|
||||
| `REPLAY_FROM` | 空（record 模式） | 指向某次历史 run 目录，replay 其 autotune 选择（见下） |
|
||||
| `USE_FLAGTUNE` | `0` | `0` 走普通 autotune（跳过搜索、快速验证）；`1` 用 FlagTune 扩展调优空间（首跑全量搜索、慢） |
|
||||
**测什么**
|
||||
|
||||
| 变量 | 默认 | 说明 |
|
||||
|-----|------|------|
|
||||
| `OP` | `fused_marlin_moe_mxfp4` | 测试函数名（`test_` 之后的部分） |
|
||||
| `OP_FILE` | `fused_marlin_moe` | benchmark 文件名（`test_` 与 `.py` 之间的部分） |
|
||||
| `SHAPE_FILE` | 空（用脚本内置 yaml） | shape yaml 路径 |
|
||||
| `FLAGGEMS_DIR` | `/workspace/FlagGems-dev` | FlagGems 仓库路径 |
|
||||
|
||||
**怎么测**
|
||||
|
||||
| 变量 | 默认 | 说明 |
|
||||
|-----|------|------|
|
||||
| `REPLAY_FROM` | 空（record 模式） | 指向某次历史 run 目录，replay 其 autotune 选择。做 A/B 时 B 侧必须设（见「A/B 对比测试标准流程」） |
|
||||
| `USE_FLAGTUNE` | `0` | `0` 走普通 autotune（跳过搜索、快速验证）；`1` 用 FlagTune 扩展调优空间（首跑全量搜索、慢）。A/B 两侧须取同值 |
|
||||
| `PARALLEL_WARMUP_GPUS` | 空（串行） | 设为 `N`（≥2）时把 autotune sweep 分片到 N 卡并行，测量仍单卡串行；不设或 `<2` 则完全串行（见「加速：多卡并行 sweep」） |
|
||||
|
||||
**输出**
|
||||
|
||||
| 变量 | 默认 | 说明 |
|
||||
|-----|------|------|
|
||||
| `FLAGGEMS_PERF_COLOR` | 空（按 tty 自动判断） | `always`/`never` 强制开/关终端颜色；`run.log` 始终为去色纯文本 |
|
||||
|
||||
## 输出目录结构
|
||||
@@ -79,11 +94,30 @@ bash run_pytest.sh # -> runs/<op>_<ts_A>/
|
||||
REPLAY_FROM=$PWD/runs/<op>_<ts_A> bash run_pytest.sh
|
||||
```
|
||||
|
||||
B 侧必须走 `REPLAY_FROM`。不能靠「改动前后各跑一次」来比——两次 record 会各自重新 sweep、可能选出不同 config，这个差异足以盖过被测改动本身（成因见「为什么需要 replay」）。
|
||||
|
||||
A/B 两侧的 `USE_FLAGTUNE` 必须取同值：该开关决定调优空间，两侧不一致时 replay 会大量 fallback，libtuner 持久缓存也各自独立命中，"同 config"前提不再成立。
|
||||
|
||||
对比 `run.log` 的 latency 表看性能差异；diff 两侧 `ttgir/<shape>/<kernel>/` 下的同名文件看 IR 差异。
|
||||
|
||||
replay 的兜底行为：B 侧遇到记录中没有的 key、或记录的 config 在新编译器下编译失败时，自动回退到现场 autotune 并在 `run.log` 打 `AUTOTUNE_REPLAY_FALLBACK reason=...` 标记——出现该标记的测量点不再满足"同 config"前提，解读时注意。另外 replay 模式的 run 目录不产生 `autotune_records/`，后续 run 的 `REPLAY_FROM` 应始终指向最初 record 的那次 A 侧目录，不要链式指向 replay 产物。
|
||||
replay 的兜底行为：B 侧遇到记录中没有的 key、或记录的 config 在新编译器下编译失败时，自动回退到现场 autotune 并在 `run.log` 打 `AUTOTUNE_REPLAY_FALLBACK reason=...` 标记——出现该标记的测量点不再满足"同 config"前提，解读时注意。标记以 `_no_evict` 结尾时更弱一层：坏 config 存在 libtuner 的 sqlite 缓存里、没有 `__delitem__` 可摘除，重试会再读到同一个 config——这类测量点按未验证处理。另外 replay 模式的 run 目录不产生 `autotune_records/`，后续 run 的 `REPLAY_FROM` 应始终指向最初 record 的那次 A 侧目录，不要链式指向 replay 产物。
|
||||
|
||||
### 为什么需要 replay（以及它管不到什么）
|
||||
|
||||
本项目涉及两层调优机制，对 A/B 的影响不同：
|
||||
|
||||
| 机制 | 结果存储 | 编译器改动后 | A/B 风险 |
|
||||
|-----|---------|------------|----------|
|
||||
| Triton `@triton.autotune` | 仅进程内存 | 每次进程重新 sweep | 计时噪声可能让 A/B 选中**不同 config** → 用 REPLAY_FROM 固定（影响比预期大，见下） |
|
||||
| FlagGems `@libtuner`（含 FlagTune 扩展空间） | `~/.flaggems/config_cache/*.db`（sqlite，跨进程持久） | **不失效**（表名只含 kernel 源码与 config 空间的 hash），A/B 自动命中同一 winner | 反向风险：B 侧沿用 A 侧选的旧 winner，测的是"旧 config 下的编译器差异"而非"各自最优" |
|
||||
|
||||
**这不是理论风险，量级足以吞掉被测优化本身。** 同一份 `shapes.yaml`、同一口径、相隔十几分钟的两次 record，平均 speedup 可以差出 10% 量级，且逐 shape 单向偏移（不是随机噪声）。diff 两侧 `autotune_records/*.json` 能看到差异往往不是微调而是换挡——`num_stages`、`BLOCK_SIZE_*`、`num_warps` 整档跳变。怀疑遇到这种情况时，先 diff 两侧的 config 再看 latency。
|
||||
|
||||
所以 record 模式的数字只用来给 replay 提供 config 基准。**若某次结论只有 record 数据支撑，按未验证处理、重跑补 replay。**
|
||||
|
||||
libtuner 的持久缓存何时失效：FlagGems kernel 源码改动、tune_configs.yaml / expand yaml / `USE_FLAGTUNE` 开关变化、Triton 大版本或 GPU 型号变化。该 db 跨 run 长存，**本脚本只清理自己的 `TRITON_CACHE_DIR`（Triton 编译产物），不碰它**——清编译缓存不等于重新调优，config 命中后照样沿用旧 winner。如果需要"各自最优"口径（让两侧各自重新 sweep），**删掉 `~/.flaggems/config_cache/TunedConfig_*.db` 或设 `FLAGGEMS_DB_URL` 指向一次性文件**——注意"各自 fresh tune"不等于"不设 `REPLAY_FROM`"：缓存已热时两侧都会直接命中同一 winner，看似独立调优实则同 config。**两种口径都合理，报告结论时注明用的哪种。**
|
||||
|
||||
同一层缓存也决定了 `_autotune_record_plugin` 的实现方式：record 不能靠"cache 新增了哪个 key"来判断本次选中的 config（缓存一热就走 cached 分支、不写新 key，键集差集恒为空），改为 `run()` 之后直接读回本次调用的 `self.cache[key]`；replay 同理不能加"key 不在 cache 里才注入"的前置条件，否则注入被跳过、该 run 表面在 replay 实际在自调优。想确认 record 真的覆盖到目标 kernel，查 `runs/<run>/autotune_records/<op>.json` 里有无对应 kernel 条目——漏记时该文件照样生成，只是少了 libtuner 那几个。
|
||||
|
||||
### ab_fold_test.sh：A/B 测试参考示例
|
||||
|
||||
@@ -94,9 +128,31 @@ bash ab_fold_test.sh
|
||||
# 汇总 log：runs/ab_fold_<时间戳>.log（已去色）；快速对账：grep -E '^#####|FAILED' <log>
|
||||
```
|
||||
|
||||
要对比其它开关 / 编译器改动 / 算子，套用该脚本改循环变量与环境变量即可，A/B 口径（同 config replay、cudagraph 计时）无需改动。
|
||||
可复用的是**口径**——同 config replay、cudagraph 计时、真实 trace shape 集、逐对成组——对比其它开关 / 编译器改动 / 算子，改循环变量与环境变量即可，口径部分不用动。
|
||||
|
||||
### cudagraph 计时的 warmup、回退与精度
|
||||
但**它是口径示例，不是可长期直接执行的回归脚本**：对比轴是 FlagGems 侧的算子开关，会随上游演进被改名、改语义或移除，本仓库不跟随同步更新（该脚本引用的开关目前就已被上游移除）。失效后果是**静默的**：脚本照样跑完全部轮次、照样输出完整对比表，只是两侧执行同一份代码，得出"无差异"的假结论。所以套用前先确认对比轴仍有效——`grep -rn '<开关名>' $FLAGGEMS_DIR/src` 要有命中，且两侧 latency 表确有差异。
|
||||
|
||||
## 加速：多卡并行 sweep（可选）
|
||||
|
||||
shape 多时墙上时间几乎全在 autotune sweep，而不在测量——被测 kernel 本身往往只有毫秒量级，绝大部分编译变体是 sweep 里测完就丢的 loser（`ttgir/index.tsv` 的 `sweep loser` 行）。`_parallel_warmup_plugin` 把 sweep 分片到 N 卡并行，再交回单卡串行测量：
|
||||
|
||||
```bash
|
||||
PARALLEL_WARMUP_GPUS=8 SHAPE_FILE=shape/DeepSeek-V4-Flash-p32768d1024.yaml bash run_pytest.sh
|
||||
```
|
||||
|
||||
加速比取决于 sweep 占比：shape 多、config 空间大的算子收益最明显，可达数倍。不设该变量（或设 <2）时插件静默 no-op，常驻 `PLUGINS` 数组即可。**产物结构、`REPLAY_FROM` 用法、latency 表格式全不变**——合并后的 config 就写进本次 run 的 `autotune_records/<op>.json`，分片临时目录跑完即删。
|
||||
|
||||
**测量本身不并行**：N 个进程压满同机多卡会通过功耗墙/散热耦合，单卡 latency 被邻居拖慢且不可复现。并行只用于"决定哪个 config 胜出"，测量仍是单进程单卡、与不开插件走同一条路径。
|
||||
|
||||
因此要留意日志里的冲突警告——同一 config key 在不同分片选出了不同 winner，说明互扰已经影响到 sweep 结果：
|
||||
|
||||
```
|
||||
WARNING 1 config key(s) got different winners across shards — parallel interference reached the sweep
|
||||
```
|
||||
|
||||
**冲突数就是这次加速的可信度指标**：0 可放心用；偏多说明 config 选择已被污染，出正式结论前不设该变量重跑一遍。其余行为（`REPLAY_FROM` 已设或可见卡不足 2 张时跳过、分片失败回退串行、轮转分片而非按块切、用子进程而非 xdist 的原因）见插件 docstring。分片绑卡遵守继承来的 `CUDA_VISIBLE_DEVICES`——用它选过卡时，分片只会落在你选的那几张上。
|
||||
|
||||
## 计时口径：cudagraph 的预热、回退与精度
|
||||
|
||||
**capture 前的显式 warmup**：`do_bench_cudagraph` 自带的内部预热只有 5 次迭代，对首跑要触发 autotune 编译（尤其含 FlagTune 扩展空间）、libtuner 选择、lazy JIT 的算子远远不够——这些一次性开销若漏进被捕获的 graph 或第一个计时迭代，测出的 latency 会 run-to-run 抖动（M=1 多 kernel 路径最明显，实测首轮可低到稳态的 ~1/3）。`_cudagraph_plugin` 因此在 capture 前显式预热：先跑一次并丢弃（吸收 autotune/JIT 编译），再按调用方传入的 warmup 时间预算（`Config.warm_up`）循环稳态预热，然后才 capture。预热次数按稳态单次耗时换算，并夹在 5–200 次之间——亚毫秒 kernel 的实际预热时长因此低于名义预算（1000ms），实测足够；若换新算子仍见首轮抖动，优先调大 `_warmup_before_capture` 里的次数上限。这样首轮即稳态、多轮一致（实测同一 M=1 shape 两轮 speedup 差 <0.1%）。
|
||||
|
||||
@@ -109,26 +165,14 @@ bash ab_fold_test.sh
|
||||
|
||||
回退是按测量点发生的，同一份 latency 表里可能混有两种口径的行；若不确定，先 `grep BENCHMARK_DIRECT_NO_CUDAGRAPH run.log` 确认哪些行是回退口径再下结论。
|
||||
|
||||
### 为什么需要 replay（以及它管不到什么）
|
||||
|
||||
本项目涉及两层调优机制，对 A/B 的影响不同：
|
||||
|
||||
| 机制 | 结果存储 | 编译器改动后 | A/B 风险 |
|
||||
|-----|---------|------------|----------|
|
||||
| Triton `@triton.autotune` | 仅进程内存 | 每次进程重新 sweep | 计时噪声可能让 A/B 选中**不同 config** → 用 REPLAY_FROM 固定 |
|
||||
| FlagGems `@libtuner`（含 FlagTune 扩展空间） | `~/.flaggems/config_cache/*.db`（sqlite，跨进程持久） | **不失效**（表名只含 kernel 源码与 config 空间的 hash），A/B 自动命中同一 winner | 反向风险：B 侧沿用 A 侧选的旧 winner，测的是"旧 config 下的编译器差异"而非"各自最优" |
|
||||
|
||||
libtuner 的持久缓存何时失效：FlagGems kernel 源码改动、tune_configs.yaml / expand yaml / `USE_FLAGTUNE` 开关变化、Triton 大版本或 GPU 型号变化。如果需要"各自最优"口径（让两侧各自重新 sweep），**删掉 `~/.flaggems/config_cache/TunedConfig_*.db` 或设 `FLAGGEMS_DB_URL` 指向一次性文件**——注意"各自 fresh tune"不等于"不设 `REPLAY_FROM`"：缓存已热时两侧都会直接命中同一 winner，看似独立调优实则同 config。**两种口径都合理，报告结论时注明用的哪种。**
|
||||
|
||||
同一层缓存也决定了 `_autotune_record_plugin` 的实现方式：record 不能靠"cache 新增了哪个 key"来判断本次选中的 config（缓存一热就走 cached 分支、不写新 key，键集差集恒为空），改为 `run()` 之后直接读回本次调用的 `self.cache[key]`；replay 同理不能加"key 不在 cache 里才注入"的前置条件，否则注入被跳过、该 run 表面在 replay 实际在自调优。想确认 record 真的覆盖到目标 kernel，查 `runs/<run>/autotune_records/<op>.json` 里有无对应 kernel 条目——漏记时该文件照样生成，只是少了 libtuner 那几个。
|
||||
|
||||
## 插件说明
|
||||
|
||||
脚本通过 `-p` 加载以下插件（`run_pytest.sh` 的 `PLUGINS` 数组，可按需注释）：
|
||||
|
||||
| 插件 | 作用 | 何时关闭 |
|
||||
|-----|------|---------|
|
||||
| `_device_guard_plugin` | 在 import flag_gems 之前直接用 torch 探测到 NVIDIA 卡就设 `GEMS_VENDOR=nvidia`，跳过 flag_gems 启动时 `nvidia-smi` 子进程探测（该探测在部分 fork 环境下会挂在 `wait4` 上导致 import 卡死） | 一般无需关：已设 `GEMS_VENDOR`/`FLAGGEMS_VENDOR` 等 env 时自动跳过，非 NVIDIA 卡上自动 no-op |
|
||||
| `_device_guard_plugin` | 在 import flag_gems 之前直接用 torch 探测到 NVIDIA 卡就设 `GEMS_VENDOR=nvidia`，跳过 flag_gems 启动时 `nvidia-smi` 子进程探测（该探测在部分 fork 环境下会挂在 `wait4` 上导致 import 卡死）。副作用：import 期即初始化 CUDA context，故与 pytest-xdist 不兼容（本框架不用 xdist） | 一般无需关：已设 `GEMS_VENDOR`/`FLAGGEMS_VENDOR` 等 env 时自动跳过，非 NVIDIA 卡上自动 no-op |
|
||||
| `_parallel_warmup_plugin` | 由 `PARALLEL_WARMUP_GPUS=N` 激活（未设则静默 no-op）：autotune sweep 分片到 N 卡并行，测量仍单卡串行、产物结构不变（见「加速：多卡并行 sweep」） | 不设该变量即关闭 |
|
||||
| `_seed_plugin` | 固定 random/numpy/torch 种子，数据相关算子（sort/topk 等）输入逐字节一致 | 不关 |
|
||||
| `_shape_inject_plugin` | 让 shape yaml 覆盖子类硬编码的 `set_shapes()` | 不关 |
|
||||
| `_shape_iter_inject_plugin` | 覆盖在 `get_input_iter` 里硬编码 shape 的类（conv/pool 等） | 不关 |
|
||||
@@ -145,13 +189,19 @@ libtuner 的持久缓存何时失效：FlagGems kernel 源码改动、tune_confi
|
||||
|
||||
先检查 GPU 是否被共占（`nvidia-smi`）；再确认对方是否开了 cudagraph——M=1 这类小 shape 下 launch 开销占比大，两种口径可差 2 倍以上，大 shape 基本一致。
|
||||
|
||||
**Q: 同一份 shape、什么都没改，两次跑出来的 speedup 不一样？**
|
||||
|
||||
正常，且幅度可能不小——record 模式每次进程都重新 sweep Triton autotune，计时噪声会让不同 run 选中不同 config。想让两次可比，B 侧必须 `REPLAY_FROM` A 侧的 record 目录；diff 两侧 `autotune_records/*.json` 可确认 config 是否真的一致。实测幅度与成因见「为什么需要 replay」。
|
||||
|
||||
**Q: 第一次跑某算子特别慢？**
|
||||
|
||||
两个来源：（1）开了 `USE_FLAGTUNE=1` 时，首跑要在 FlagTune 扩展空间做全量搜索（fused_marlin_moe_mxfp4 单进程可达数分钟甚至十几分钟，期间 GPU 满载、`run.log` 停在测试名不动属正常，不是卡死）；（2）libtuner 算子首跑的全量 sweep（mm 约 50 分钟）。winner 持久化到 `~/.flaggems/config_cache/` 后同 shape 秒级命中（但该缓存会因源码/开关/GPU 变化失效，失效后又需重搜）。默认 `USE_FLAGTUNE=0` 走普通 autotune，单 shape 通常 10 秒级出结果。
|
||||
|
||||
shape 多时这部分会主导墙上时间，可设 `PARALLEL_WARMUP_GPUS=N` 并行做 sweep，见「加速：多卡并行 sweep」。
|
||||
|
||||
**Q: `--warmup/--iter` 要设吗？**
|
||||
|
||||
不用。cudagraph 计时路径下，传入的 warmup 时间预算会被用来在 capture 前显式预热（先吸收 autotune/JIT 编译再稳态预热，稳定首轮，见"cudagraph 计时的 warmup、回退与精度"），iter 默认 100ms 预算按 kernel 耗时自适应换算次数。
|
||||
不用。cudagraph 计时路径下，传入的 warmup 时间预算会被用来在 capture 前显式预热（先吸收 autotune/JIT 编译再稳态预热，稳定首轮，见「计时口径：cudagraph 的预热、回退与精度」），iter 默认 100ms 预算按 kernel 耗时自适应换算次数。
|
||||
|
||||
**Q: ttgir 目录里某个 shape 少了文件？**
|
||||
|
||||
|
||||
@@ -180,12 +180,21 @@ def _replay_run(original):
|
||||
except Exception as exc:
|
||||
if injected_key is not None:
|
||||
# Recorded config failed under the current build: drop it and
|
||||
# let run() autotune.
|
||||
# let run() autotune. Only Autotuner.cache is a plain dict;
|
||||
# LibTuner.cache is a sqlite-backed ConfigCache with no
|
||||
# __delitem__, so eviction is impossible there -- say so in the
|
||||
# marker instead of retrying with the same bad config and
|
||||
# reporting a clean fallback.
|
||||
evicted = True
|
||||
try:
|
||||
del self.cache[injected_key]
|
||||
except Exception:
|
||||
pass
|
||||
_emit_marker(f"compile_{type(exc).__name__}")
|
||||
evicted = False
|
||||
# _no_evict means the retry below re-reads the same recorded
|
||||
# config, so it is not a clean "fell back to live autotune":
|
||||
# treat those measurement points as unverified.
|
||||
suffix = "" if evicted else "_no_evict"
|
||||
_emit_marker(f"compile_{type(exc).__name__}{suffix}")
|
||||
return original(self, *args, **kwargs)
|
||||
raise
|
||||
return runner
|
||||
|
||||
@@ -0,0 +1,306 @@
|
||||
"""pytest plugin: cut wall time by doing the autotune sweep on N GPUs in parallel.
|
||||
|
||||
Why: for shape-heavy ops the sweep dominates, not the measurement. Measured on
|
||||
fused_marlin_moe_mxfp4 / 53 shapes: 3755s total, of which the summed kernel time
|
||||
is 49ms; ttgir/index.tsv holds 2858 compiled variants, 2645 of them `sweep
|
||||
loser`. The same 53 shapes replayed (configs pinned, no sweep) take 196s. The
|
||||
sweep is ~19x the measurement, so that is the part worth parallelizing.
|
||||
|
||||
What this does NOT parallelize: the measurement. N processes hammering N GPUs of
|
||||
one box couple through the power/thermal budget, so per-card latency gets dragged
|
||||
by whatever the neighbours are doing, by an amount that does not reproduce. This
|
||||
plugin only parallelizes "decide which config wins", then hands the configs to
|
||||
the normal single-process single-GPU path, which times things exactly as it would
|
||||
without the plugin.
|
||||
|
||||
Enable with PARALLEL_WARMUP_GPUS=<N>; unset (or <2) makes the plugin a no-op, so
|
||||
`-p _parallel_warmup_plugin` can stay in the plugin list permanently.
|
||||
|
||||
No new output structure: the merged configs land in the run's own
|
||||
autotune_records/<op>.json — the same path record mode writes and REPLAY_FROM
|
||||
reads — and the sweep's scratch dirs are deleted. The run just finishes sooner,
|
||||
plus a few log lines. (It is the config actually used for the measurement, so the
|
||||
artifact stays faithful to what was run.)
|
||||
"""
|
||||
|
||||
from __future__ import annotations
|
||||
|
||||
import json
|
||||
import os
|
||||
import shutil
|
||||
import subprocess
|
||||
import sys
|
||||
import tempfile
|
||||
import time
|
||||
from pathlib import Path
|
||||
from typing import Any, Dict, List, Tuple
|
||||
|
||||
import pytest
|
||||
|
||||
_GPUS_ENV = "PARALLEL_WARMUP_GPUS"
|
||||
_WORKER_ENV = "FLAGGEMS_PERF_WARMUP_WORKER"
|
||||
_RECORD_DIR_ENV = "FLAGGEMS_PERF_AUTOTUNE_RECORD_DIR"
|
||||
_REPLAY_DIR_ENV = "FLAGGEMS_PERF_AUTOTUNE_REPLAY_DIR"
|
||||
_OP_ENV = "FLAGGEMS_PERF_CURRENT_OP"
|
||||
|
||||
|
||||
def _op_name() -> str:
|
||||
return os.environ.get(_OP_ENV, "").strip() or "default"
|
||||
|
||||
|
||||
def _requested_gpus() -> int:
|
||||
"""N from the env, clamped to what the box has. 0 disables."""
|
||||
raw = os.environ.get(_GPUS_ENV, "").strip()
|
||||
if not raw or os.environ.get(_WORKER_ENV):
|
||||
return 0
|
||||
try:
|
||||
want = int(raw)
|
||||
except ValueError:
|
||||
return 0
|
||||
if want < 2:
|
||||
return 0
|
||||
try:
|
||||
import torch
|
||||
have = torch.cuda.device_count()
|
||||
except Exception:
|
||||
return 0
|
||||
return max(0, min(want, have))
|
||||
|
||||
|
||||
def _visible_devices() -> List[str]:
|
||||
"""The device ids a shard may be pinned to, in parent-visible order.
|
||||
|
||||
Must respect an inherited CUDA_VISIBLE_DEVICES: writing a bare shard index
|
||||
into the child would re-interpret it as an absolute id, so a caller who
|
||||
picked idle cards (CUDA_VISIBLE_DEVICES=5,6) would silently get cards 0,1 —
|
||||
exactly the busy-GPU case the caller was avoiding.
|
||||
"""
|
||||
raw = os.environ.get("CUDA_VISIBLE_DEVICES", "").strip()
|
||||
if raw:
|
||||
return [d.strip() for d in raw.split(",") if d.strip()]
|
||||
try:
|
||||
import torch
|
||||
return [str(i) for i in range(torch.cuda.device_count())]
|
||||
except Exception:
|
||||
return []
|
||||
|
||||
|
||||
def _read_shape_yaml(path: str, op: str) -> Tuple[List[Any], Dict[str, Any]]:
|
||||
"""Shapes for this op, plus the sibling keys to carry into each shard."""
|
||||
import yaml
|
||||
with open(path) as f:
|
||||
doc = yaml.safe_load(f) or {}
|
||||
entry = doc.get(op) or {}
|
||||
shapes = entry.get("shapes") or []
|
||||
extra = {k: v for k, v in entry.items() if k != "shapes"}
|
||||
return list(shapes), extra
|
||||
|
||||
|
||||
def _shard(shapes: List[Any], n: int) -> List[List[Any]]:
|
||||
"""Round-robin, not contiguous blocks.
|
||||
|
||||
Shape lists are usually sorted ascending, so a block split hands one worker
|
||||
every big (slowest-to-compile) shape and the wall time collapses to that
|
||||
worker. Round-robin spreads compile cost evenly.
|
||||
"""
|
||||
return [s for s in (shapes[i::n] for i in range(n)) if s]
|
||||
|
||||
|
||||
def _spawn(shards: List[List[Any]], op: str, extra: Dict[str, Any],
|
||||
scratch: Path, argv: List[str], devices: List[str]
|
||||
) -> Tuple[List[Path], List[int]]:
|
||||
"""One subprocess per shard, each pinned to its own GPU.
|
||||
|
||||
Subprocesses rather than pytest-xdist: _device_guard_plugin initializes a
|
||||
CUDA context at import time, which does not survive fork-based parallelism.
|
||||
"""
|
||||
import yaml
|
||||
procs: List[Tuple[int, subprocess.Popen, Any]] = []
|
||||
recs: List[Path] = []
|
||||
for i, shard in enumerate(shards):
|
||||
w = scratch / f"w{i}"
|
||||
w.mkdir(parents=True, exist_ok=True)
|
||||
body = dict(extra)
|
||||
body["shapes"] = shard
|
||||
(w / "shapes.yaml").write_text(
|
||||
yaml.safe_dump({op: body}, sort_keys=False,
|
||||
default_flow_style=None, allow_unicode=True))
|
||||
rec = w / "rec"
|
||||
rec.mkdir(exist_ok=True)
|
||||
|
||||
child_argv: List[str] = []
|
||||
skip_next = False
|
||||
for a in argv:
|
||||
if skip_next:
|
||||
skip_next = False
|
||||
continue
|
||||
if a == "--shape_file":
|
||||
skip_next = True
|
||||
continue
|
||||
if a.startswith("--shape_file="):
|
||||
continue
|
||||
child_argv.append(a)
|
||||
child_argv += ["--shape_file", str(w / "shapes.yaml")]
|
||||
|
||||
env = dict(os.environ)
|
||||
env["CUDA_VISIBLE_DEVICES"] = devices[i]
|
||||
env[_WORKER_ENV] = "1" # stops recursion
|
||||
env[_RECORD_DIR_ENV] = str(rec) # shard records its own picks
|
||||
env.pop(_REPLAY_DIR_ENV, None) # a shard must sweep
|
||||
env.pop(_GPUS_ENV, None)
|
||||
env["TRITON_CACHE_DIR"] = str(w / ".triton_cache")
|
||||
env.pop("FLAGGEMS_PERF_TTGIR_DUMP_DIR", None) # IR comes from the real run
|
||||
env["FLAGGEMS_PERF_COLOR"] = "never"
|
||||
|
||||
log = open(w / "worker.log", "w")
|
||||
procs.append((i, subprocess.Popen(
|
||||
[sys.executable, "-u", "-m", "pytest", *child_argv],
|
||||
stdout=log, stderr=subprocess.STDOUT, env=env), log))
|
||||
recs.append(rec)
|
||||
|
||||
try:
|
||||
for _, p, _log in procs:
|
||||
p.wait()
|
||||
except BaseException:
|
||||
# Ctrl-C (or anything else) must not leave N children holding GPUs:
|
||||
# terminate, then reap, then let the exception continue.
|
||||
for _, p, _log in procs:
|
||||
if p.poll() is None:
|
||||
p.terminate()
|
||||
for _, p, _log in procs:
|
||||
try:
|
||||
p.wait(timeout=10)
|
||||
except subprocess.TimeoutExpired:
|
||||
p.kill()
|
||||
raise
|
||||
finally:
|
||||
for _, _p, log in procs:
|
||||
log.close()
|
||||
return recs, [i for i, p, _ in procs if p.returncode != 0]
|
||||
|
||||
|
||||
def _merge(recs: List[Path], op: str) -> Tuple[Dict[str, Any], int, int]:
|
||||
"""Union the shards' {kernel: {key: config}} maps.
|
||||
|
||||
A key present in several shards with *different* values means that key's
|
||||
winner moved under parallel interference; count those — the count is how much
|
||||
to trust this warmup. First value wins.
|
||||
"""
|
||||
merged: Dict[str, Dict[str, Any]] = {}
|
||||
conflicts = 0
|
||||
for rec in recs:
|
||||
p = rec / f"{op}.json"
|
||||
if not p.is_file():
|
||||
continue
|
||||
try:
|
||||
data = json.loads(p.read_text())
|
||||
except Exception:
|
||||
continue
|
||||
for kernel, bucket in data.items():
|
||||
if not isinstance(bucket, dict):
|
||||
continue
|
||||
tgt = merged.setdefault(kernel, {})
|
||||
for key, cfg in bucket.items():
|
||||
if key in tgt:
|
||||
conflicts += tgt[key] != cfg
|
||||
continue
|
||||
tgt[key] = cfg
|
||||
return merged, sum(len(b) for b in merged.values()), conflicts
|
||||
|
||||
|
||||
@pytest.hookimpl(tryfirst=True)
|
||||
def pytest_configure(config):
|
||||
"""Do the parallel sweep here, before _autotune_record_plugin configures.
|
||||
|
||||
That plugin decides record-vs-replay and patches Autotuner.run inside its own
|
||||
pytest_configure, so the swap to replay has to be in place before it runs —
|
||||
hence tryfirst. Ordering within the -p list is not relied upon.
|
||||
"""
|
||||
from _term_style import tag
|
||||
gpus = _requested_gpus()
|
||||
if not gpus:
|
||||
return
|
||||
|
||||
op = _op_name()
|
||||
shape_file = getattr(config.option, "shape_file", "") or ""
|
||||
if not shape_file or not Path(shape_file).is_file():
|
||||
print(f"{tag('[parallel-warmup-plugin]')} no --shape_file; "
|
||||
"parallel warmup needs an explicit shape set, skipping", flush=True)
|
||||
return
|
||||
if os.environ.get(_REPLAY_DIR_ENV, "").strip():
|
||||
print(f"{tag('[parallel-warmup-plugin]')} REPLAY_FROM is set; configs are "
|
||||
"already pinned, nothing to sweep, skipping", flush=True)
|
||||
return
|
||||
|
||||
try:
|
||||
shapes, extra = _read_shape_yaml(shape_file, op)
|
||||
except Exception as exc:
|
||||
print(f"{tag('[parallel-warmup-plugin]')} cannot read shapes "
|
||||
f"({type(exc).__name__}: {exc}); skipping", flush=True)
|
||||
return
|
||||
if len(shapes) < 2:
|
||||
print(f"{tag('[parallel-warmup-plugin]')} only {len(shapes)} shape(s); "
|
||||
"sharding would not pay off, skipping", flush=True)
|
||||
return
|
||||
|
||||
devices = _visible_devices()
|
||||
if len(devices) < 2:
|
||||
print(f"{tag('[parallel-warmup-plugin]')} only {len(devices)} visible "
|
||||
"GPU(s); nothing to parallelize, skipping", flush=True)
|
||||
return
|
||||
|
||||
shards = _shard(shapes, min(gpus, len(shapes), len(devices)))
|
||||
scratch = Path(tempfile.mkdtemp(prefix=f"warmup_{op}_"))
|
||||
print(f"{tag('[parallel-warmup-plugin]')} sweeping {len(shapes)} shapes on "
|
||||
f"{len(shards)} GPUs (shards: {[len(s) for s in shards]}); this phase's "
|
||||
"latency is discarded, only configs are kept", flush=True)
|
||||
|
||||
keep_scratch = False
|
||||
t0 = time.time()
|
||||
try:
|
||||
recs, bad = _spawn(shards, op, extra, scratch,
|
||||
list(config.invocation_params.args), devices)
|
||||
merged, total, conflicts = _merge(recs, op)
|
||||
elapsed = time.time() - t0
|
||||
|
||||
if not total:
|
||||
keep_scratch = True
|
||||
print(f"{tag('[parallel-warmup-plugin]')} no configs recovered in "
|
||||
f"{elapsed:.0f}s; falling back to normal serial autotune "
|
||||
f"(worker logs kept in {scratch})", flush=True)
|
||||
return
|
||||
|
||||
# Publish the merged configs where record mode would have written them,
|
||||
# so the artifact layout is unchanged and REPLAY_FROM still works. Then
|
||||
# point the record plugin at that file in replay mode: the serial
|
||||
# measurement below reuses these configs instead of sweeping again.
|
||||
rec_dir = os.environ.get(_RECORD_DIR_ENV, "").strip()
|
||||
out = Path(rec_dir) if rec_dir else (scratch / "merged")
|
||||
out.mkdir(parents=True, exist_ok=True)
|
||||
(out / f"{op}.json").write_text(
|
||||
json.dumps(merged, indent=2, ensure_ascii=False) + "\n")
|
||||
if not rec_dir:
|
||||
keep_scratch = True # nowhere else to keep the configs
|
||||
os.environ.pop(_RECORD_DIR_ENV, None) # record+replay is rejected
|
||||
os.environ[_REPLAY_DIR_ENV] = str(out)
|
||||
|
||||
msg = (f"{tag('[parallel-warmup-plugin]')} sweep done in {elapsed:.0f}s: "
|
||||
f"{len(merged)} kernels / {total} configs -> {out / f'{op}.json'}; "
|
||||
"measurement continues serially on one GPU")
|
||||
if bad:
|
||||
msg += f" (WARNING shard(s) {bad} exited non-zero; missing keys will "
|
||||
msg += "fall back to live autotune)"
|
||||
print(msg, flush=True)
|
||||
if conflicts:
|
||||
print(f"{tag('[parallel-warmup-plugin]')} WARNING {conflicts} config "
|
||||
"key(s) got different winners across shards — parallel "
|
||||
"interference reached the sweep. Treat this run as a rough "
|
||||
f"pass; unset {_GPUS_ENV} for a clean baseline", flush=True)
|
||||
except Exception as exc:
|
||||
keep_scratch = True
|
||||
print(f"{tag('[parallel-warmup-plugin]')} warmup failed "
|
||||
f"({type(exc).__name__}: {exc}); falling back to normal serial "
|
||||
f"autotune (scratch kept in {scratch})", flush=True)
|
||||
finally:
|
||||
if not keep_scratch:
|
||||
shutil.rmtree(scratch, ignore_errors=True)
|
||||
+12
-10
@@ -1,17 +1,19 @@
|
||||
#!/bin/bash
|
||||
# A/B 测试参考示例：FLAGGEMS_MXFP4_FOLDSCALE（fold_scale）开关验证
|
||||
# （4 个 DeepSeek-V4-Flash trace yaml × FOLD=0/1 共 8 轮）。
|
||||
# 口径：USE_FLAGTUNE=0；FOLD=0（基线）先跑并 record autotune config，FOLD=1 用
|
||||
# REPLAY_FROM 回放同一套 config（两侧同配置比 wall-time）。
|
||||
# 对比其它开关/算子时，改循环变量与环境变量即可复用同一口径。
|
||||
# 全部输出汇总到 runs/ab_fold_<时间戳>.log；各轮 runs/<op>_<时间戳>/ 产物照常存档。
|
||||
# 用法：bash ab_fold_test.sh
|
||||
# A/B 对比口径示例：4 个 trace shape 集 × 开关 0/1，共 8 轮。
|
||||
#
|
||||
# 口径：每个 shape 集先跑基线（record autotune config），再用 REPLAY_FROM 回放
|
||||
# 同一套 config 跑对照侧，两侧只差被测开关。对比其它开关/算子时改循环变量即可。
|
||||
#
|
||||
# 注意：对比轴 FLAGGEMS_MXFP4_FOLDSCALE 属于 FlagGems，已被上游移除。开关不存在
|
||||
# 时本脚本仍会跑完并输出完整表格，但两侧执行同一份代码——套用前先确认对比轴有效
|
||||
# （grep 该开关名于 $FLAGGEMS_DIR/src 应有命中）。详见 README。
|
||||
#
|
||||
# 输出：runs/ab_fold_<时间戳>.log（汇总）+ 各轮 runs/<op>_<时间戳>/
|
||||
set -uo pipefail
|
||||
|
||||
cd "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
|
||||
# 终端颜色：下方 tee 管道会让 run_pytest.sh 侧检测不到 tty，在这里先判断并下传
|
||||
# （与 run_pytest.sh 自身的做法一致）；总 log 最后统一去色。
|
||||
# tee 管道会让子脚本检测不到 tty，故在此判断后下传（同 run_pytest.sh 的做法）
|
||||
if [[ -t 1 && -z "${NO_COLOR:-}" ]]; then
|
||||
export FLAGGEMS_PERF_COLOR=always
|
||||
fi
|
||||
@@ -31,7 +33,7 @@ LOG="runs/ab_fold_$(date +%Y%m%d-%H%M%S).log"
|
||||
echo "########## ALL DONE ##########"
|
||||
} 2>&1 | tee "$LOG"
|
||||
|
||||
# 总 log 去掉 ANSI 转义，保证 grep/diff 面对纯文本（终端输出保留颜色）
|
||||
# 去掉 ANSI 转义以便 grep/diff（终端输出保留颜色）
|
||||
sed -i -E $'s/\x1b\\[[0-9;]*[A-Za-z]//g' "$LOG"
|
||||
|
||||
echo ">>> 总 log: $(pwd)/$LOG"
|
||||
|
||||
+30
-24
@@ -1,23 +1,19 @@
|
||||
#!/bin/bash
|
||||
# 单算子性能测试入口（手动调试用）。
|
||||
# 用法：改下方【配置区】，或用环境变量覆盖，例如：
|
||||
# 单算子性能测试入口。改配置区或用同名环境变量覆盖：
|
||||
# OP=softmax OP_FILE=softmax SHAPE_FILE=my_shapes.yaml bash run_pytest.sh
|
||||
# 产物统一落在 runs/<op>_<时间戳>/：run.log、shapes.yaml、autotune_records/、ttgir/。
|
||||
# 产物落在 runs/<op>_<时间戳>/：run.log、shapes.yaml、autotune_records/、ttgir/
|
||||
set -euo pipefail
|
||||
|
||||
# ============================== 配置区 ==============================
|
||||
# 每项均可用同名环境变量覆盖，详见 README「环境变量一览」。
|
||||
|
||||
# 被测算子：OP=测试函数名（去掉 test_ 前缀）；OP_FILE=benchmark 文件名
|
||||
# （对应 $FLAGGEMS_DIR/benchmark/test_<OP_FILE>.py::test_<OP>）
|
||||
# 被测算子，对应 $FLAGGEMS_DIR/benchmark/test_<OP_FILE>.py::test_<OP>
|
||||
OP="${OP:-fused_marlin_moe_mxfp4}"
|
||||
OP_FILE="${OP_FILE:-fused_marlin_moe}"
|
||||
|
||||
# FlagGems 仓库路径
|
||||
FLAGGEMS_DIR="${FLAGGEMS_DIR:-/workspace/FlagGems-dev}"
|
||||
|
||||
# shape 来源：SHAPE_FILE 非空则用该 yaml；为空则用下方内置 yaml。
|
||||
# yaml 顶层 key 必须是 op 名。
|
||||
# shape 来源：非空则用该 yaml，否则用 INLINE_YAML。顶层 key 必须是 op 名。
|
||||
SHAPE_FILE="${SHAPE_FILE:-}"
|
||||
read -r -d '' INLINE_YAML <<'YAML' || true
|
||||
fused_marlin_moe_mxfp4:
|
||||
@@ -44,17 +40,17 @@ YAML
|
||||
# 调优空间：0=普通 autotune（默认，快速验证）；1=FlagTune 扩展空间（首跑全量搜索、慢）
|
||||
USE_FLAGTUNE="${USE_FLAGTUNE:-0}"
|
||||
|
||||
# autotune record/replay（见 _autotune_record_plugin.py）：
|
||||
# - 空：record 模式，本次选中的 config 记录到 $OUT_DIR/autotune_records/<op>.json；
|
||||
# - 指向某次历史 runs/<op>_<时间戳> 目录：replay 该次记录（A/B 两侧同 config）。
|
||||
# 空=record 模式，把本次选中的 config 记入 autotune_records/<op>.json；
|
||||
# 指向某次历史 run 目录则 replay 其记录，用于 A/B 两侧锁同一套 config。
|
||||
REPLAY_FROM="${REPLAY_FROM:-}"
|
||||
|
||||
# 终端颜色：always/never 强制开/关；为空则按 tty 自动判断（run.log 始终去色）
|
||||
# always/never 强制开关终端颜色，空则按 tty 判断（run.log 始终去色）
|
||||
FLAGGEMS_PERF_COLOR="${FLAGGEMS_PERF_COLOR:-}"
|
||||
|
||||
# pytest 插件列表（可按需注释停用；各插件作用见 README「插件说明」）
|
||||
# 各插件作用见 README「插件说明」；注释掉某行即停用该插件
|
||||
PLUGINS=(
|
||||
-p _device_guard_plugin
|
||||
-p _parallel_warmup_plugin
|
||||
-p _seed_plugin
|
||||
-p _shape_inject_plugin
|
||||
-p _shape_iter_inject_plugin
|
||||
@@ -71,12 +67,24 @@ PLUGINS=(
|
||||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
TEST_FILE="$FLAGGEMS_DIR/benchmark/test_${OP_FILE}.py::test_${OP}"
|
||||
|
||||
OUT_DIR="$SCRIPT_DIR/runs/${OP}_$(date +%Y%m%d-%H%M%S)"
|
||||
# 产物目录，可用 OUT_DIR 指定。时间戳只到秒，并发启动会撞名，故用不带 -p 的
|
||||
# mkdir 抢占（已存在即失败），撞上就退让到 -2、-3……
|
||||
if [[ -n "${OUT_DIR:-}" ]]; then
|
||||
mkdir -p "$OUT_DIR"
|
||||
else
|
||||
mkdir -p "$SCRIPT_DIR/runs"
|
||||
BASE="$SCRIPT_DIR/runs/${OP}_$(date +%Y%m%d-%H%M%S)"
|
||||
OUT_DIR="$BASE"
|
||||
n=1
|
||||
until mkdir "$OUT_DIR" 2>/dev/null; do
|
||||
n=$((n + 1))
|
||||
OUT_DIR="${BASE}-${n}"
|
||||
(( n > 99 )) && { echo "!!! 无法创建产物目录（$BASE 及后缀均被占用）" >&2; exit 1; }
|
||||
done
|
||||
fi
|
||||
LOG_FILE="$OUT_DIR/run.log"
|
||||
mkdir -p "$OUT_DIR"
|
||||
|
||||
# 颜色决策：下方 tee 管道会让 python 侧看不到 tty，所以在这里判断，
|
||||
# 并通过 FLAGGEMS_PERF_COLOR 下传给各插件（_term_style.py 消费）。
|
||||
# tee 管道会让 python 侧检测不到 tty，故在 shell 层判断后经环境变量下传
|
||||
if [[ -z "$FLAGGEMS_PERF_COLOR" && -t 1 && -z "${NO_COLOR:-}" ]]; then
|
||||
FLAGGEMS_PERF_COLOR=always
|
||||
fi
|
||||
@@ -94,7 +102,7 @@ export PYTHONPATH="$SCRIPT_DIR${PYTHONPATH:+:$PYTHONPATH}"
|
||||
export FLAGGEMS_PERF_CURRENT_OP="$OP"
|
||||
export PYTHONUNBUFFERED=1 # 实时输出不缓冲
|
||||
|
||||
# record/replay 二选一，通过环境变量激活对应模式
|
||||
# record/replay 互斥，各由自己的环境变量激活
|
||||
if [[ -n "$REPLAY_FROM" ]]; then
|
||||
AUTOTUNE_ENV="FLAGGEMS_PERF_AUTOTUNE_REPLAY_DIR=$REPLAY_FROM/autotune_records"
|
||||
[[ -f "$REPLAY_FROM/autotune_records/$OP.json" ]] || \
|
||||
@@ -106,7 +114,7 @@ else
|
||||
MODE_DESC=record
|
||||
fi
|
||||
|
||||
# 解析 shape 文件：SHAPE_FILE 为空时把内置 yaml 写到临时文件
|
||||
# 未指定 shape 文件时，把 INLINE_YAML 落到临时文件供 pytest 读取
|
||||
if [[ -z "$SHAPE_FILE" ]]; then
|
||||
SHAPE_FILE="$(mktemp --suffix=.yaml)"
|
||||
printf '%s\n' "$INLINE_YAML" > "$SHAPE_FILE"
|
||||
@@ -119,9 +127,8 @@ status=0
|
||||
echo "${C_BOLD}>>> op=$OP mode=$MODE_DESC USE_FLAGTUNE=$USE_FLAGTUNE${C_RESET}"
|
||||
echo "${C_DIM}>>> out=$OUT_DIR${C_RESET}"
|
||||
|
||||
# _ir_meta_plugin 在进程退出时把"实际被使用"的变体的 ttgir 按 shape 整理落盘
|
||||
# （挂在 atexit 上，CUDA crash 后已编译部分仍可拿到）。
|
||||
# 目录结构与命名图例见 <dump>/naming.md 和 index.tsv（后者也记录落选的 sweep 变体）。
|
||||
# 每次用独立的 Triton 缓存目录，跑完即删：保证编译过程可复现，且 ttgir 落盘
|
||||
# 只包含本次的变体（_ir_meta_plugin 在 atexit 里按 shape 整理）。
|
||||
CACHE_DIR="$OUT_DIR/.triton_cache"
|
||||
rm -rf "$CACHE_DIR"; mkdir -p "$CACHE_DIR"
|
||||
status=0
|
||||
@@ -143,7 +150,6 @@ status=0
|
||||
exit "$status"
|
||||
} 2>&1 | tee "$LOG_FILE" || status=$?
|
||||
|
||||
# 终端保留颜色；落盘的 run.log 去掉 ANSI 转义，保证 grep/diff 面对纯文本
|
||||
# （Ctrl-C 中断时会跳过去色，仅影响观感）。
|
||||
# run.log 去掉 ANSI 转义以便 grep/diff（终端输出保留颜色；Ctrl-C 时会跳过这步）
|
||||
sed -i -E $'s/\x1b\\[[0-9;]*[A-Za-z]//g' "$LOG_FILE"
|
||||
exit "$status"
|
||||
|
||||
Reference in New Issue
Block a user